ReleaseThe storyDrawnWork for SUN

C1D1 re-rack

Taking it all apart.
Building it back up.

The real room, the parts and the people behind the re-rack. A dated record from the floor.

Ordered by original photo and video capture dates, shown in Eastern time. Hover or focus a photo for its original color; select it for a closer look.

Before the room came apart

The original machine and the first trays of removed fittings.

The original machine, before the teardown.Inspect photo ↗

The original machine, before the teardown.

The original column arrangement and connected lines.Inspect photo ↗

The original column arrangement and connected lines.

Connections across the original machine.Inspect photo ↗

Connections across the original machine.

A closer view of the original assembly.Inspect photo ↗

A closer view of the original assembly.

Another view of the original assembly.Inspect photo ↗

Another view of the original assembly.

Fittings laid out on trays.Inspect photo ↗

Fittings laid out on trays.

The machine is out

The exposed rails, removed pieces and the crew in the cleared room.

Rails remaining in the room after the machine came down.Inspect photo ↗

Rails remaining in the room after the machine came down.

Removed pieces set aside in the room.Inspect photo ↗

Removed pieces set aside in the room.

The crew in the cleared room.Inspect photo ↗

The crew in the cleared room.

A moment with the crew after teardown.Inspect photo ↗

A moment with the crew after teardown.

A walk around the cleared room.

27.73s

The room and rails during teardown.

20.20s

A closer look at the exposed rack.

28.87s

Everything on the bench

Components laid out for the teardown and cleaning process. Every piece gets its place before the rebuild.

Disassembled components organized on the shelves.Inspect photo ↗

Disassembled components organized on the shelves.

Working through the fittings on the bench.

46.87s
A close-up of the fittings on the workbench.Inspect photo ↗

A close-up of the fittings on the workbench.

On the decks. The parts table becomes a DJ booth.

8.93s

The next chapter is still being built: rack assembly, mounting the machine, and the new piping.

Tool first, then drawings

Dated from the files and the spec.

    The room, Option B

    The room as Cody’s planning tool lays it out. Drag to orbit, scroll to zoom.
    Planning render, not a photo
    View
    Show
      The room and the rails

      The planning tool itself

      The original planning tools. Press to open one here, or open it in a tab.

      The welder drawings

      Four sheets rasterised from the PDF, shown as plates. Press one to read it full size.

        The record

        From the files.
        The record